| The compact PE300BUV (J2029) Cermax xenon short-arc lamps from Excelitas Technologies have an integrated parabolic reflector, enabling high intensity focused output of ultraviolet, visible and infrared radiation. |
|
| OPERATIONAL SPECIFICATIONS |
| Power (nominal): |
300 W |
| Power (range): |
180-320 W |
| Current (nominal): |
21 A (DC) |
| Current (range): |
10-22 A (DC) |
| Operating Voltage (nominal): |
14 V (DC) |
| Operating Voltage (range): |
13-16 V (DC) |
| Ignition Voltage: |
23 kV (recommended minimum) |
| Temperature: |
150° C (maximum) |
| Lifetime *: |
1000 h typical |
|
| INITIAL OUTPUT AT NOMINAL POWER |
| Peak Intensity: |
460x103 cd |
| Radiant Output **: |
50 W |
| UV Output **: |
6.6 W |
| IR Output **: |
26.8 W |
| Visible Output **: |
4,500 lm |
| Color Temperature: |
5,050 K |
| Peak Instabilities: |
4% |
| Beam Geometry ***: |
5°/6°/7° |
|
| PHYSICAL SPECIFICATIONS |
| Arc Gap: |
0.049" (1.24 mm) |
| Reflector Geometry: |
Parabolic Y2 = 0.5 X (inch) |
| Weight: |
132 g |
| Window Diameter: |
1.0" (25.4 mm) |
|
| NOTES |
| 1. Lamp must not be operated with window facing upwards within 45° of vertical. |
| 2. Seal temperature must not exceed 150 °C. |
| 3. Current/power regulated power supplies are recommended. |
4. Lamp must be operated within recommended current and power range. Over pow-
ering may lead to arc instability, hard starting and premature aging. |
| 5. Hot mirror assembly is available for IR filtering. |
| 6. Cermax lamps are safer to handle, compared to their non-compact xenon arc lamp equivalents. However, caution must be practised when operating these lamps due to high pressure, high voltage, high temperatures of up to 200 °C and their IR and UV radiation, which can cause skin burns and eye damage. Consult hazard sheet included with each lamp shipment. |
|
|
Image top right: PE300BUV (J2029) xenon lamp (similar to illustration)
Image center right: Mechanical dimensions PE300BUV (J2029) lamp
Image bottom right: Spectral output PE300BF (PE300BFA) and PE300BUV (J2029) lamps
* End of life is defined as 50% of initial output.
** Total output in all directions. Wavelengths=UV<390 nm, IR>770 nm, Visible: 390-770 nm.
*** Beam geometry defined as the half angle at 10% PTS after 1/100/1000 hours.
**** Nominal values at 300 W after 2 hour burn in.
Cermax® is a registered trademark of Excelitas Technologies Corp.
We reserve the right to change technical specifications without notice. |
