|
|
|
Specifications |
Membrane: |
nylon, HPLC certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Prefilter: |
glass microfiber |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 4 mm: |
<15 µl |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
100 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· HPLC and GC sample preparation and clean up |
· Acids >1N |
· Dissolution sample analysis |
· Halogenated solvents |
· General sample preparation |
· Proteinous samples with high non-specific binding affinities |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42204-NN |
Nylon |
4 mm |
0.20 µm |
100 |
110,81 |
105,27 |
97,51 |
95,29 |
91,97 |
42204-NC |
Nylon |
4 mm |
0.20 µm |
500 |
551,31 |
551,31 |
551,31 |
551,31 |
551,31 |
44504-NN |
Nylon |
4 mm |
0.45 µm |
100 |
109,84 |
104,34 |
96,66 |
94,46 |
91,16 |
44504-NC |
Nylon |
4 mm |
0.45 µm |
500 |
522,96 |
522,96 |
522,96 |
522,96 |
522,96 |
42217-NN |
Nylon |
17 mm |
0.20 µm |
200 |
238,14 |
226,23 |
209,56 |
204,80 |
197,66 |
42217-NC |
Nylon |
17 mm |
0.20 µm |
500 |
542,51 |
542,51 |
542,51 |
542,51 |
542,51 |
44517-NN |
Nylon |
17 mm |
0.45 µm |
200 |
238,14 |
226,23 |
209,56 |
204,80 |
197,66 |
44517-NC |
Nylon |
17 mm |
0.45 µm |
500 |
562,06 |
562,06 |
562,06 |
562,06 |
562,06 |
42230-NN |
Nylon |
30 mm |
0.20 µm |
100 |
210,16 |
210,16 |
210,16 |
210,16 |
210,16 |
42230-NC |
Nylon |
30 mm |
0.20 µm |
500 |
950,13 |
950,13 |
950,13 |
950,13 |
950,13 |
42230-NBX |
Nylon |
30 mm |
0.20 µm |
5,000 |
6.631,36 |
6.631,36 |
6.631,36 |
6.631,36 |
6.631,36 |
44530-NN |
Nylon |
30 mm |
0.45 µm |
100 |
210,92 |
200,38 |
185,61 |
181,39 |
175,07 |
44530-NC |
Nylon |
30 mm |
0.45 µm |
500 |
870,95 |
870,95 |
870,95 |
870,95 |
870,95 |
44530-NBX |
Nylon |
30 mm |
0.45 µm |
5,000 |
6.631,36 |
6.631,36 |
6.631,36 |
6.631,36 |
6.631,36 |
44526-NN |
Nylon |
30 mm |
0.45 µm |
100 |
189,64 |
189,64 |
189,64 |
189,64 |
189,64 |
44526-NC |
Nylon |
30 mm |
0.45 µm |
500 |
870,95 |
870,95 |
870,95 |
870,95 |
870,95 |
44526-NBX |
Nylon |
30 mm |
0.45 µm |
5,000 |
7.427,05 |
7.427,05 |
7.427,05 |
7.427,05 |
7.427,05 |
54513-RP |
Nylon |
30 mm |
0.45 µm |
500 (Redi-Pac) |
728,24 |
728,24 |
728,24 |
728,24 |
728,24 |
41230-NN |
Nylon |
30 mm |
1.5 µm |
100 |
185,65 |
176,37 |
163,37 |
159,66 |
154,09 |
41230-NC |
Nylon |
30 mm |
1.5 µm |
500 |
919,83 |
919,83 |
919,83 |
919,83 |
919,83 |
45030-NN |
Nylon |
30 mm |
5.0 µm |
100 |
188,57 |
179,14 |
165,94 |
162,17 |
156,51 |
45030-NC |
Nylon |
30 mm |
5.0 µm |
500 |
870,95 |
870,95 |
870,95 |
870,95 |
870,95 |
45030-NBX |
Nylon |
30 mm |
5.0 µm |
5,000 |
7.552,17 |
7.552,17 |
7.552,17 |
7.552,17 |
7.552,17 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
PTFE SYRINGE FILTERS
Excellent chemical resistance for use with organic matrices...
· Naturally hydrophobic membrane provides excellent flow rates and high loading
· Exceptional temperature stability
· 1 µm prefilter (only 30 mm type) for optimal performance with particulate-laden analytes
PTFE syringe filters are indicated for filtration of gaseous or organic solvent based samples. Their natural hydrophobic membrane exhibits broad chemical resistance and unsurpassed temperature stability. Due to their hydrophobic nature, PTFE filters can be utilized as a moisture barrier in venting applications.
Specifications |
Membrane: |
PTFE, HPLC certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Prefilter: |
glass microfiber |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 4 mm: |
<15 µl |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
100 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· HPLC and GC sample preparation and clean up |
· Perchloric acid |
· Dissolution sample analysis - HCl media based |
· Methylene chloride (limited exposure) |
· General sample preparation |
· Dioxane |
· Elevated temperature samples (caustic or acidic solutions) |
· DMF |
|
· Formic acid <50% |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42204-NP |
hydrophobic PTFE |
4 mm |
0.20 µm |
100 |
110,81 |
105,27 |
97,51 |
95,29 |
91,97 |
44504-NP |
hydrophobic PTFE |
4 mm |
0.45 µm |
100 |
110,46 |
110,46 |
110,46 |
110,46 |
110,46 |
44504-NPC |
hydrophobic PTFE |
4 mm |
0.45 µm |
500 |
520,03 |
520,03 |
520,03 |
520,03 |
520,03 |
42217-NP |
hydrophobic PTFE |
17 mm |
0.20 µm |
200 |
284,80 |
270,56 |
250,62 |
244,92 |
236,38 |
42217-PC |
hydrophobic PTFE |
17 mm |
0.20 µm |
500 |
661,77 |
661,77 |
661,77 |
661,77 |
661,77 |
44517-NP |
hydrophobic PTFE |
17 mm |
0.45 µm |
200 |
286,41 |
286,41 |
286,41 |
286,41 |
286,41 |
44517-PC |
hydrophobic PTFE |
17 mm |
0.45 µm |
500 |
661,77 |
661,77 |
661,77 |
661,77 |
661,77 |
44517-PBX |
hydrophobic PTFE |
17 mm |
0.45 µm |
5,000 |
6.299,99 |
6.299,99 |
6.299,99 |
6.299,99 |
6.299,99 |
42230-NP |
hydrophobic PTFE |
30 mm |
0.20 µm |
100 |
207,23 |
207,23 |
207,23 |
207,23 |
207,23 |
42230-PC |
hydrophobic PTFE |
30 mm |
0.20 µm |
500 |
954,04 |
954,04 |
954,04 |
954,04 |
954,04 |
44530-NP |
hydrophobic PTFE |
30 mm |
0.45 µm |
100 |
214,81 |
204,07 |
189,03 |
184,74 |
178,29 |
44530-PC |
hydrophobic PTFE |
30 mm |
0.45 µm |
500 |
912,01 |
912,01 |
912,01 |
912,01 |
912,01 |
44530-ND |
hydrophobic PTFE |
30 mm |
0.45 µm |
1,500 |
2.493,60 |
2.493,60 |
2.493,60 |
2.493,60 |
2.493,60 |
44530-PBX |
hydrophobic PTFE |
30 mm |
0.45 µm |
5,000 |
8.010,61 |
8.010,61 |
8.010,61 |
8.010,61 |
8.010,61 |
41030-NP |
hydrophobic PTFE |
30 mm |
1.0 µm |
100 |
194,40 |
184,68 |
171,07 |
167,18 |
161,35 |
42217-NPL |
hydrophilic PTFE |
17 mm |
0.20 µm |
200 |
285,43 |
285,43 |
285,43 |
285,43 |
285,43 |
44517-NPL |
hydrophilic PTFE |
17 mm |
0.45 µm |
200 |
285,58 |
285,58 |
285,58 |
285,58 |
285,58 |
42230-NPL |
hydrophilic PTFE |
30 mm |
0.20 µm |
100 |
216,03 |
216,03 |
216,03 |
216,03 |
216,03 |
44530-NPL |
hydrophilic PTFE |
30 mm |
0.45 µm |
100 |
216,03 |
216,03 |
216,03 |
216,03 |
216,03 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
PVDF SYRINGE FILTERS
Low non-specific binding with exceptional chemical resistance...
· Hydrophilic membrane provides excellent flow rates and low binding coefficients
· Compatible with a wide range of aqueous and organic based samples
· 1 µm prefilter (only 30 mm type) for optimal performance with particulate-laden analytes
Specifications |
Membrane: |
PVDF, HPLC certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Prefilter: |
glass microfiber |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 4 mm: |
<15 µl |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
100 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· HPLC and GC sample preparation and clean up |
· DMF |
· Protein based samples with high non-specific binding |
· DMSO |
|
· MEK |
|
· Acetone |
|
· Most caustic solutions >6N |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42204-PV |
PVDF |
4 mm |
0.20 µm |
100 |
115,67 |
109,88 |
101,79 |
99,47 |
96,00 |
42204-PVC |
PVDF |
4 mm |
0.20 µm |
500 |
440,85 |
440,85 |
440,85 |
440,85 |
440,85 |
44504-PV |
PVDF |
4 mm |
0.45 µm |
100 |
116,32 |
116,32 |
116,32 |
116,32 |
116,32 |
42217-PV |
PVDF |
17 mm |
0.20 µm |
200 |
301,07 |
301,07 |
301,07 |
301,07 |
301,07 |
42217-PVC |
PVDF |
17 mm |
0.20 µm |
200 |
730,19 |
730,19 |
730,19 |
730,19 |
730,19 |
44517-PV |
PVDF |
17 mm |
0.45 µm |
200 |
281,88 |
267,79 |
248,05 |
242,42 |
233,96 |
44517-PVC |
PVDF |
17 mm |
0.45 µm |
500 |
602,14 |
602,14 |
602,14 |
602,14 |
602,14 |
42230-PV |
PVDF |
30 mm |
0.20 µm |
100 |
205,28 |
205,28 |
205,28 |
205,28 |
205,28 |
42230-PVC |
PVDF |
30 mm |
0.20 µm |
500 |
987,28 |
987,28 |
987,28 |
987,28 |
987,28 |
44530-PV |
PVDF |
30 mm |
0.45 µm |
100 |
203,32 |
203,32 |
203,32 |
203,32 |
203,32 |
44530-PVC |
PVDF |
30 mm |
0.45 µm |
500 |
918,85 |
918,85 |
918,85 |
918,85 |
918,85 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
REGENERATED CELLULOSE SYRINGE FILTERS
Superior chemical resistance optimized for biological sample recoveries...
· Hydrophilic membrane provides excellent flow rates and extremely low binding coefficients
· Compatible with a wide range of aqueous and organic based samples
· Superior choice for biological assays, gel capsule dissolution testing, protein sample matrices
Regenerated cellulose syringe filters are ideally suited for almost any laboratory procedure, from HPLC sample preparation to dissolution sample validation. In aqueous or organic sample environments, regenerated cellulose possesses superior chemical resistance. Its extremely low biological based binding coefficient is ideally suited for maximum sample recoveries of biological based assays. Regenerated cellulose contains no binders, surfactants or wetting agents to assure zero extractables in analytical procedures.
Specifications |
Membrane: |
regenerated cellulose, HPLC certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Protein binding: |
<5µg/cm2 |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 4 mm: |
<15 µl |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
100 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· HPLC and GC sample preparation and clean up |
· Sulfuric acid |
· Dissolution sample analysis (especially high binding tablets or capsules) |
· Hydrochloric acid |
· Protein based samples with high non-specific binding |
· Phosphoric acid |
· Sample analysis with required maximum recoveries |
· Nitric acid >25% |
· Analysis requiring low non-specific binding over a wide pH range |
· DMF |
|
· Phenol |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
52204-RC |
RC |
4 mm |
0.20 µm |
100 |
111,44 |
111,44 |
111,44 |
111,44 |
111,44 |
54504-RC |
RC |
4 mm |
0.45 µm |
100 |
112,75 |
107,11 |
99,22 |
96,97 |
93,58 |
52217-RC |
RC |
17 mm |
0.20 µm |
200 |
433,03 |
433,03 |
433,03 |
433,03 |
433,03 |
54517-RC-100 |
RC |
17 mm |
0.45 µm |
100 |
193,55 |
193,55 |
193,55 |
193,55 |
193,55 |
54517-RC |
RC |
17 mm |
0.45 µm |
200 |
388,07 |
388,07 |
388,07 |
388,07 |
388,07 |
54517-RCBX |
RC |
17 mm |
0.45 µm |
5,000 |
17.168,81 |
17.168,81 |
17.168,81 |
17.168,81 |
17.168,81 |
52230-RC |
RC |
30 mm |
0.20 µm |
100 |
323,55 |
323,55 |
323,55 |
323,55 |
323,55 |
52230-RCC |
RC |
30 mm |
0.20 µm |
500 |
1.429,83 |
1.429,83 |
1.429,83 |
1.429,83 |
1.429,83 |
54530-RC |
RC |
30 mm |
0.45 µm |
100 |
307,91 |
307,91 |
307,91 |
307,91 |
307,91 |
54530-RCC |
RC |
30 mm |
0.45 µm |
500 |
1.344,06 |
1.344,06 |
1.344,06 |
1.344,06 |
1.344,06 |
54530-RCBX |
RC |
30 mm |
0.45 µm |
5,000 |
13.107,96 |
13.107,96 |
13.107,96 |
13.107,96 |
13.107,96 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
PES SYRINGE FILTERS
Recommended for ion chromatography...
· Hydrophilic membrane provides excellent flow rates and extremely low binding coefficients
· Certified for ion chromatography
· Low affinity for binding drugs, ideal dissolution testing procedures
Specifications |
Membrane: |
PES, ICP certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Max. operating pressure - 30 mm: |
90 psi |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 4 mm: |
<15 µl |
Max. operating temp.: |
100 °C |
Retention volume - 17 mm: |
<29 µl |
|
|
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· IC sample preparation and analysis |
· Concentraded acids |
· Dissolution sample analysis |
· MeCl |
· Protein based samples in aqueous solutions |
· Chloroform |
|
· Hexane |
|
· Acetone |
|
· MEK |
|
· THF |
|
· DMSO |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42217-PS |
PES |
17 mm |
0.20 µm |
200 |
301,07 |
301,07 |
301,07 |
301,07 |
301,07 |
44517-PS |
PES |
17 mm |
0.45 µm |
200 |
287,39 |
287,39 |
287,39 |
287,39 |
287,39 |
42230-PS |
PES |
30 mm |
0.20 µm |
100 |
209,19 |
209,19 |
209,19 |
209,19 |
209,19 |
44530-PS |
PES |
30 mm |
0.45 µm |
100 |
202,34 |
202,34 |
202,34 |
202,34 |
202,34 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
POLYPROPYLENE SYRINGE FILTERS
Chemically resistant membrane with low protein binding...
· Hydrophilic membrane for aqueous or organic sample matrices
· Best suitable for protein or peptide based assays
· Low protein binding
Specifications |
Membrane: |
polypropylene |
Max. operating pressure - 17 mm: |
115 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
100 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· Peptide or protein based assays |
· Hexane |
· HPLC |
· Toluene |
|
· Benzene |
|
· Limited resistance to MeCl and Chloroform |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42217-PP |
PP |
17 mm |
0.20 µm |
200 |
434,01 |
434,01 |
434,01 |
434,01 |
434,01 |
44517-PP |
PP |
17 mm |
0.45 µm |
200 |
532,74 |
532,74 |
532,74 |
532,74 |
532,74 |
42230-PP |
PP |
30 mm |
0.20 µm |
100 |
479,95 |
479,95 |
479,95 |
479,95 |
479,95 |
44530-PP |
PP |
30 mm |
0.45 µm |
100 |
393,66 |
373,98 |
346,42 |
338,55 |
326,74 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
CELLULOSE ACETATE SYRINGE FILTERS
For aqueous solutions or biological samples...
· Hydrophilic membrane with low protein binding coefficients, for high flow rates
· Superior choice for biological assays, gel capsule dissolution testing, protein sample matrices
· Certified for HPLC
Specifications |
Membrane: |
cellulose acetate, HPLC certified |
Max. operating pressure - 4 mm: |
75 psi |
Housing: |
virgin polypropylene, medical grade |
Max. operating pressure - 17 mm: |
115 psi |
Protein binding: |
<24µg/cm2 |
Max. operating pressure - 30 mm: |
90 psi |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
Retention volume - 4 mm: |
<15 µl |
Autoclavable: |
for 15 min. at 121 °C |
Retention volume - 17 mm: |
<29 µl |
Max. operating temp.: |
110 °C |
Retention volume - 30 mm: |
<137 µl |
|
|
Applications |
Chemical Incompatabilities |
· Protein based samples with high non-specific binding |
· Acids |
· Sample analysis with required maximum recoveries |
· NaOH |
|
· Dichloromethane |
|
· Chloroform |
|
· Ketones |
|
· DMSO |
|
· THF |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
42204-CA |
CA |
4 mm |
0.20 µm |
100 |
116,32 |
116,32 |
116,32 |
116,32 |
116,32 |
44504-CA |
CA |
4 mm |
0.45 µm |
100 |
116,32 |
116,32 |
116,32 |
116,32 |
116,32 |
42217-CA |
CA |
17 mm |
0.20 µm |
200 |
286,41 |
286,41 |
286,41 |
286,41 |
286,41 |
42217-CAC |
CA |
17 mm |
0.20 µm |
500 |
588,33 |
588,33 |
588,33 |
588,33 |
588,33 |
44517-CA |
CA |
17 mm |
0.45 µm |
200 |
241,44 |
241,44 |
241,44 |
241,44 |
241,44 |
44517-CAC |
CA |
17 mm |
0.45 µm |
500 |
555,84 |
555,84 |
555,84 |
555,84 |
555,84 |
42230-CA |
CA |
30 mm |
0.20 µm |
100 |
211,14 |
211,14 |
211,14 |
211,14 |
211,14 |
44530-CA |
CA |
30 mm |
0.45 µm |
100 |
221,89 |
221,89 |
221,89 |
221,89 |
221,89 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
GLASS MICROFIBER SYRINGE FILTERS
Low extractable, 100% binder-free borosilicate glass filters for dissolution analysis...
· Increased sample throughput with 1,2 and 3,1 µm porosity membranes
· Excellent for use with viscous or particle laden samples coupled with broad range chemical compatibility
Specifications |
Membrane: |
glass microfiber |
Max. operating pressure - 30 mm: |
90 psi |
Housing: |
virgin polypropylene, medical grade |
Retention volume - 30 mm: |
<137 µl |
Connections: |
enhanced female Luer-Lock inlet, male slip outlet |
|
|
Max. operating temp.: |
110 °C |
|
|
|
|
Applications |
Chemical Incompatabilities |
· Viscous or particle laden samples |
· Limited resistance with Ammonium |
· Dissolution sample analysis |
· Potassium |
|
· Sodium hydroxide solutions |
|
|
Part No. |
Membrane |
Ø |
Pore Size |
Pack Size |
Price 1-4 Pack |
Price 5-9 Pack |
Price 10-14 Pack |
Price 15-24 Pack |
Price >24 Pkg |
40730-GM |
GM |
30 mm |
0.70 µm |
100 |
176,90 |
168,06 |
155,68 |
152,14 |
146,83 |
40730-GMC |
GM |
30 mm |
0.70 µm |
500 |
846,52 |
846,52 |
846,52 |
846,52 |
846,52 |
41230-GM |
GM |
30 mm |
1.2 µm |
100 |
178,88 |
178,88 |
178,88 |
178,88 |
178,88 |
41230-GMC |
GM |
30 mm |
1.2 µm |
500 |
847,49 |
847,49 |
847,49 |
847,49 |
847,49 |
42730-GM |
GM |
30 mm |
3.1 µm |
100 |
182,79 |
182,79 |
182,79 |
182,79 |
182,79 |
|
|
|
All prices are in Euros (EUR) per pack and are subject to change without further notice.
OTHER SYRINGE FILTER TYPES
 |
In addition to the TITAN3 products described above, we offer other syringe filter types (non-sterile and sterile) with different sizes and membrane types.
Further information: Other syringe filter types |
|
|
All brand names, trademarks and product images are the property of their respective owners and are merely used for description.
For further questions, please don't hesitate to contact us.
|